Introduction
CLIP 206
P B X For 2 Trunkline and 6 Extensions
The CLIP 206 system provide Two P & T line with Six Internal Extensions and variety of built in features . This Sleek Model is very compact and fits into any decor.Iits employing solid State space division switching and strored program control. The system can be connected to the individual stations of Decadic/DTMF Electronic push button phone.
The CLIP 206 Hardware is roubust in structure. The hardware control signals are used to implement a start-up, recovery and tear-down mechanism. and it is fully controlled with the help of Microcontroller
The CLIP 206 P b X is compact in size and it is easy to install in any where .The only way to get your products with affordable price is Telematics .Telematics has the right telecommunication system for you
Alarm Setting and Cancellation
To change the Day/Night mode or Night /Day mode .This feature will make easy to
attend the incoming calls. This will facilitate you to divert the incoming calls to the
specified extensions during Day/Night .
Call Transfer
Transfer existing call to another extension
Paging
If you want to declare any common message (or) specific to person whose
location not known through speaker you can use this feature.
Memory Dialing
Here you can store the phone numbers in global memory as well as personal memory.
Five party Conference
This feature could connect you to make a conference with more than two parties and you can connect with maximum of four numbers.
Delay DID
DID means Direct Inward Dialing .i.e., Trunk caller can ring his required extension
by dialing the extension number.
|
Manual Day / Night Mode Changeover |
Memory Dialing |
Dynamic Status |
Five party Conference |
Call Transfer |
Call Campon |
Extension Class Of service |
Paging |
Direct Outgoing Station Access |
Delay DID |
Remote Programming |
Denied Table |

| Telephony
Interface |
: 2 P & T Line |
|
: 6 Stations |
| Technology |
: MCU based SPC CMOS Switching |
| Extension Loop |
: 500 Ohms |
| Dialing |
:Pulse 10 PPS +/-10% |
| Insertion Loss |
: Less than 1dB |
| Cross-Talk Attenuation |
: More than 65dB |
| Switching |
: Space Division CMOS Cross point
Switch |
| DTMF |
: As perCC ITU-T Q.23 |
| Power
Supply |
|
| Mains |
: 230 VAC +/- 0%, 50 Hz |
| Power Consumption
(Typical) |
: 20W |
| Operating Temperature |
: 0ºC to 45ºC (95% RH) |
| Dimension |
: 178.5mm *244mm *55mm |
|